Part Number Hot Search : 
25YXH390 74AC4020 HFA11 18CX10 UN4115Q SMAJ50A LT158 LTC3440
Product Description
Full Text Search
 

To Download 110CNQ045ASL Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Bulletin PD-20629 rev. A 09/01
110CNQ045A
SCHOTTKY RECTIFIER New GenIII D-61 Package
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @55Apk,TJ=125C (per leg) range
110 Amp
Description/Features
The 110CNQ045A center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Center tap module Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, small footprint, high current package
110CNQ045A Units
110 45 5400 0.5 A V A V
- 55 to 150
C
New fully transfer-mold low profile, small footprint, high current package
Case Styles
110CNQ045A 110CNQ045ASM 110CNQ045ASL
D61-8 www.irf.com
D61-8-SM
D61-8-SL 1
110CNQ045A
Bulletin PD-20629 rev. A 09/01
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
110CNQ045A
45
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Leg PerDevice
110CNQ Units
55 110 5400 800 54 8 A mJ A A
Conditions
50% duty cycle @ TC = 125 C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 8 Amps, L = 1.7 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical
Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg)
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1)
110CNQ Units
0.54 0.7 0.5 0.69 3 350 3800 5.5 10,000 V V V V mA mA pF nH V/ s @ 55A @ 110A @ 55A @ 110A
Conditions
TJ = 25 C TJ = 125 C VR = rated VR
IRM CT LS
Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Series Inductance (1) (Per Leg) Max. Junction Capacitance (Per Leg)
TJ = 25 C TJ = 125 C
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change (Rated VR)
(1) Pulse Width < 300s, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
110CNQ Units
-55 to 150 -55 to 150 0.5 0.25 0.30 7.8 (0.28) Min. Max. 40 (35) 58 (50) C C
Conditions
RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink (D61-8 Only) wt T Approximate Weight MountingTorque (D61-8 Only)
C/W DC operation C/W DCoperation
* See Fig. 4
C/W Mounting surface , smooth and greased Device flatness < 5 mils g (oz.) Kg-cm (Ibf-in)
2
www.irf.com
110CNQ045A
Bulletin PD-20629 09/01
1000
1000
Tj = 150C
Reverse Current - I R (mA)
100 10 1 0.1 0.01
0 5
125C 100C 75C 50C
25C
Instantaneous Forward Current - I F (A)
100
10 15 20 25 30 35 40 45
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg)
10000
Tj = 25C
10
T = 150C J T = 125C J T = 25C J
1 0 0.5 1 1.5 2
Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg)
Junction Capacitance - C T (p F)
1000 0 5 10 15 20 25 30 35 40 45
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg)
1
Thermal Impedance - Z thJC (C/W)
0.1
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance)
PDM
t1 t2
0.01
Notes: 1. Duty factor D = t 1 / t 2 2. Peak Tj = Pdm x ZthJC + Tc
0.001 0.00001
0.0001
0.001
0.01
0.1
1
10
t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
www.irf.com
3
110CNQ045A
Bulletin PD-20629 rev. A 09/01
150
Allowable Case Temperature (C)
50
DC
Average Power Loss (Watts)
140 130 120 Square wave (D = 0.50) 80% Rated Vr applied 110 see note (2) 100
40 30
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 RMS Limit DC
20 10 0 0 10 20 30 40 50 60 70 80
Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg)
0 10 20 30 40 50 60 70 80 90
Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg)
10000
Non-Repetitive Surge Current - I FSM (A)
1000
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge
100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
L HIGH-SPEED SWITCH FREE-WHEEL DIODE 40HFL40S02 Vd = 25 Volt
DUT
IRFP460 Rg = 25 ohm
+
CURRENT MONITOR
Fig. 8 - Unclamped Inductive Test Circuit
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
110CNQ045A
Bulletin PD-20629 09/01
Outline Table
Outline D61-8
Dimensions are in millimeters and (inches)
Outline D61-8-SM
Dimensions are in millimeters and (inches)
www.irf.com
5
110CNQ045A
Bulletin PD-20629 rev. A 09/01
Outline Table
Outline D61-8-SL
Dimensions are in millimeters and (inches)
Marking Information
INTERNATIONAL RECTIFIER LOGO THIS IS A 110CNQ045A WITH LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 IN THE ASSEMBLY LINE "A" ASSEMBLY LOT CODE
PART NUMBER
110CNQ045A 89 09 045A DATE CODE YEAR 0 = 2000 WEEK 45 LINE A
6
www.irf.com
110CNQ045A
Bulletin PD-20629 09/01
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01
www.irf.com
7
This datasheet has been download from: www..com Datasheets for electronics components.


▲Up To Search▲   

 
Price & Availability of 110CNQ045ASL

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X